Last Updated on
Although, it’s highly recommended to always update your computers OS whenever an update is out, However, there are times when a program or application on your system may not be compactable with the new Windows 10 update file. If that’s the case, you may want to learn how to stop windows 10 update.
However, it’s practically not possible to stop windows 10 update forever, but you can pause or delay it’s installation of a period of time.
So, as mentioned earlier above, it’s important to always update your windows 10 PC. But in situations where one or more of your favorite programs is preventing you from doing this, then you may pause or stop windows 10 update until you find an alternative.
So, to learn how to stop windows 10 update, follow these steps below.
Note: If you doing this for the first time, make sure you back up your system in case anything goes wrong.
1. Pause automatic updates
Tap the Start menu, at that point the Settings pinion. Presently go to ‘Update and Security’, click ‘Windows Update’ on the left-hand side, at that point click ‘Propelled choices’. Under ‘Delay Updates’, flip the change to ‘On’. This will stop Windows refreshes for 35 days, however, you’ll have to download the most recent updates once that period is finished in the event that you need to pause further updates.
You can likewise concede feature updates by as long as 365 days and quality updates (which contain significant security fixes) by as long as 30 days. When these periods are up, you’ll have to download refreshes before you can concede them once more.
2. Meter your network connection
This is another straightforward thing to attempt. Tap Start, at that point, click the Settings pinion. From here, click ‘System and Internet‘, at that point click ‘Wi-Fi’ in the left-hand section, at that point the name of your Wi-Fi association. Look down to the ‘Metered association’ segment and flip the ‘Set as metered association’ change to ‘On’.
This discloses to Windows 10 that you’re on a restricted information plan, with the outcome that it won’t consequently push updates to you (despite the fact that you can in any case physically install them). Notwithstanding, in case you’re on an Ethernet association this technique won’t work, so you’ll need to attempt one of the different strategies in this guide.
3. Prevent a downloaded update from installing
When an update has begun the installation, you shouldn’t stop it – doing as such can be conceivably risky for your PC. Be that as it may, if Windows 10 has downloaded an update yet hasn’t begun installing it yet, you can even now stop it.
In the Windows 10 search bar, type ‘Security and Maintenance‘, at that point click the principal result to raise the control board window. tap the ‘Support’ title to extend it, at that point look to the ‘Programmed Maintenance’ segment. Snap ‘Stop support’ to end the update.
On the off chance that you alter your perspective and need to restart the update, just click ‘Begin support’.
4. Disable the Windows Update startup service
In the Windows 10 search bar, type ‘service’. Right-click the top outcome and select ‘Keep running as admin‘. Look down the rundown until you arrive at the Windows Update section. On the off chance that the ‘Status’ segment says “Running”, right-click the Windows Update section and click ‘Stop’.
Presently, right-click it again and click ‘Properties’. In the subsequent menu, under ‘Startup type’, pick ‘disable’, at that point click ‘ok’.
This will anticipate Windows Update from consequently introducing updates. In the event that regardless you need to avoid programmed update however need to offer yourself the chance to install update physically, select ‘Manual’ starting from the drop menu.
5. Disable updates using Group Policy
This includes getting your hands somewhat messy yet is simple enough. Type ‘gpedit.msc’ into the Windows 10 search bar and tap the main outcome. Presently explore to the accompanying way utilizing the left-hand sheet: ‘PC Configuration > Administrative Templates > Windows Components > Windows Update.’ In the right-hand window, double-tap ‘configure Automatic Updates’.
This will open another window. In the upper left corner, click ‘disable’, at that point click ‘Apply’ and ‘ok’. This will keep Windows 10 from consequently downloading and installing updates, despite the fact that you can at present physically search for updates by opening Windows Update.
6. Limit updates using Group Policy
Then again, you can confine Windows refreshes as opposed to debilitating them. As in stage 5, open gpedit.msc, explore to ‘PC Configuration > Administrative Templates > Windows Components > Windows Update’ and double-tap ‘configure Automatic Updates’. This time, rather than ‘disable’, click ‘Empowered’.
In the ‘Alternatives’ box on the left-hand side, click the top drop-down box and browse one of the accompanying four choices:
- Inform for download and auto-install
- Auto download and inform for install
- Auto download and plan the install
- Permit neighborhood administrator to pick the setting
The ‘Notice for download and auto-install’ alternative is the nearest to incapacitating programmed downloads
7. Disable updates using the Registry
Before fiddling with the Registry, make a reinforcement of anything significant, as committing an error can cause issues for your system.
Presently, type ‘regedit’ into the Windows 10 search bar and tap the top outcome. Explore to the accompanying way in the left-hand section: ‘HKEY_LOCAL_MACHINE > SOFTWARE > Policies > Microsoft > Windows’.
Right-click on the Windows organizer and click ‘New > Key’. Name it ‘WindowsUpdate’ and press ‘Enter’.
Right-click in this and click ‘New > Key’, at that point name this passage AU and press ‘Enter’. On the right-hand side of this passage, right-click and tap ‘New > DWORD (32-piece) Value)’. Name this section ‘NoAutoUpdate’ and press ‘Enter’.
When you’ve made this, double-tap the new passage and change the 0 to a 1 in the ‘Worth information’ box. Snap ‘alright’ and restart your computer.
8. Limit updates using the Registry
You can restrain Windows refreshes as opposed to disabling them in the Registry. To do as such, using the 6 steps above up to and including the point where you have made the AU passage.
Right-click the clear space on the blank space and click ‘New > DWORD (32-piece) Value’. This time, name the section AUOptions (rather than NoAutoUpdate) and press ‘Enter’.
Double-tap the section; in the “Worth information” box, erase the 0 and supplant it with either 2, 3, 4 or 5.
These relate to the numbers in stage 5, which means you’ll get the accompanying outcomes:
2 – Notify for download and auto-install
3 – Auto download and advise for install
4 – Auto download and plan the install
5 – Allow nearby administrator to pick the setting